Products

high frequency, ceramic shear icp® accel., 10 mv/g, 5 to 60k hz, 5-44 top conn.

ICP® Accelerometer

Model 352A60

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Lead Time for 1-5 is 8 Wks. Lead Time for 6-10 is 10 Wks. Lead Time for 11-20 is 12 Wks.
	Lead Time for 11-20 is 12 Wks.

High frequency, ceramic shear ICP® accel., 10 mV/g, 5 to 60k Hz, 5-44 top conn.

This miniature accelerometer model achieves extremely high frequency response from 5 Hz to 60 kHz, and incorporates a LP filter to avoid saturation of the output signal to to excessive vibration.

Sensitivity: (±15%)10 mV/g (1.02 mV/(m/s²))
Measurement Range: ±500 g pk (±4905 m/s² pk)
Broadband Resolution: 0.002 g rms (0.02 m/s² rms)
Sensing Element: Ceramic
Weight: 0.21 oz (6.0 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[4] Calculated.
[5] >6 mA excitation current required when driving cables longer than 50 ft (15.2 m) to avoid distortion and maintain full range
[2] Typical.
[4] Calculated.
[5] >6 mA excitation current required when driving cables longer than 50 ft (15.2 m) to avoid distortion and maintain full range
[2] Typical.
[6] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±15 %)	10 mV/g	1.02 mV/(m/s²)
Measurement Range	±500 g pk	±4905 m/s² pk	[5]
Frequency Range (±3 dB)	5 to 60000 Hz	5 to 60000 Hz
Electrical Filter Corner Frequency	45 kHz	45 kHz	[4]
Electrical Filter Roll-off	10 dB/decade	10 dB/decade	[4]
Resonant Frequency	≥95 kHz	≥95 kHz
Broadband Resolution (1)	0.002 g rms	0.02 m/s² rms	[2]
Non-Linearity	≤1 %	≤1 %	[1]
Transverse Sensitivity	≤5 %	≤5 %	[3]
Environmental
Overload Limit (Shock)	±5000 g pk	±49050 m/s² pk
Temperature Range	-65 to 250 °F	-54 to +121 °C
Temperature Response	See Graph %/°F	See Graph %/°F	[2]
Base Strain Sensitivity	≤0.05 g/µε	≤0.49 (m/s²)/µε	[2]
Electrical
Excitation Voltage	18 to 30 VDC	18 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA	[5]
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC
Discharge Time Constant	0.02 to 0.06 sec	0.02 to 0.06 sec	[4]
Spectral Noise (10 Hz)	160 µg/√Hz	1570 (µm/sec²)/√Hz	[2]
Spectral Noise (100 Hz)	40 µg/√Hz	390 (µm/sec²)/√Hz	[2]
Spectral Noise (1 kHz)	15 µg/√Hz	147 (µm/sec²)/√Hz	[2]
Spectral Noise (10 kHz)	10 µg/√Hz	98 (µm/sec²)/√Hz	[2]
Physical
Size - Height	0.81 in	21.6 mm
Size - Hex	3/8 in	3/8 in
Weight	0.21 oz	6.0 gm	[2]
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Stainless Steel	Stainless Steel
Sealing	Welded Hermetic	Welded Hermetic
Electrical Connector	5-44 Coaxial	5-44 Coaxial
Electrical Connection Position	Top	Top
Mounting	Integral Stud	Integral Stud
Mounting Thread	10-32 Male	10-32 Male