Products

triax icp® force sensor, 25 lb (fz), 10 lb (fx,y), 100 mv/lb (z), 500 mv/lb (x, y), shunt-less calibration (fcs-10)

3-Component ICP® Force Sensor

Model 260M21

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
3 Call for Lead Time
  • CE
  • IP

Triax ICP® force sensor, 25 lb (Fz), 10 lb (Fx,y), 100 mV/lb (z), 500 mV/lb (x, y), shunt-less calibration (FCS-10)

  • Temperature Range: -65 to +250 °F (-54 to +121 °C)
  • Electrical Connector: 4-Pin

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Sensitivites are for listed preload. Sensitivites may vary ±5% depending on preload used.
[4] Sensitivities are dependent upon supplied bolt.
[2] Typical.
[5] Preload should be at least 10 times the X and Y operating range used.
[6] Perform in steps of 14 in-lbs (158 N cm) to protect electronics (40 V max)
[7] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±30 %) (Z Axis) 100 mV/lb 22.5 mV/N [3] [4]
Sensitivity (±30 %) (X or Y Axis) 500 mV/lb 112 mV/N [3] [4]
Measurement Range (Z Axis) 25 lb 0.111 kN
Measurement Range (X or Y Axis) 10 lb 0.044 kN
Maximum Force 300 lb 1.334 kN
Maximum Force (X or Y Axis) 60 lb 0.267 kN
Maximum Moment (Z Axis) 14 ft-lb 18.98 Nm
Maximum Moment (X or Y Axis) 13 ft-lb 17.63 Nm
Broadband Resolution (z axis) 0.0003 lb-rms 0.0013 N-rms [2]
Broadband Resolution (x or y axis) 0.00004 lb-rms 0.0002 N-rms [2]
Upper Frequency Limit 90000 Hz 90000 Hz
Low Frequency Response (-5 %) (Z-Axis) 0.01 Hz 0.01 Hz
Low Frequency Response (-5 %) (X or Y Axis) 0.01 Hz 0.01 Hz
Non-Linearity ≤1 % FS ≤1 % FS [1]
Cross Talk (between X and Y Axis) ±3 % ±3 %
Cross Talk (between (X or Y Axis) and Z Axis) ±5 % ±5 %
Environmental
Temperature Range -65 to +250 °F -54 to +121 °C
Electrical
Full Scale Output (Z Direction) ±2.5 VDC ±2.5 VDC
Full Scale Output (X and Y Direction) ±5 VDC ±5 VDC
Discharge Time Constant (Z Axis) ≥50 sec ≥50 sec
Discharge Time Constant (X or Y Axis) ≥50 sec ≥50 sec
Excitation Voltage (all channels) 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation (all channels) 2 to 20 mA 2 to 20 mA
Output Impedance ≤100 Ohm ≤100 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Output Polarity Positive Positive
Physical
Preload Torque 56 in-lb 6.3 Nm [5] [6]
Stiffness (Z Axis) 10 lb/µin 1.75 kN/µm [2]
Stiffness (X or Y Axis) 4 lb/µin 0.7 kN/µm [2]
Size - Height 0.390 in 9.9 mm
Size - Length 1.075 in 27.3 mm
Size - Width 0.95 in 24.1 mm
Size - Bolt Diameter 0.205 in 5.21 mm
Size - ID 0.319 in 8.1 mm
Size - Sensing Surface 0.68 in 17.27 mm
Weight 0.927 oz 26.28 gm
Housing Material Stainless Steel Stainless Steel
Sealing Hermetic Hermetic
Electrical Connector 4-Pin 4-Pin
Electrical Connection Position Side Side

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
081A70 Pre-load bolt (for Models 260A01, 260A11, & 260A31) 1
082B02 Anti-friction washer for Models (M)202B, (M)212B, (M)260A01, (M)260A11 & (M)260A31 1
083A10 Pilot bushing (for Models 260A01, 260A11 & 260A31) 1
FCS-10 1
M081A70 Pre-load bolt (for Models 260A01, 260A11 & 260A31) 1

Optional Versions


(M) Metric Mount
Accessories:
Supplied M081A70 Mounting Stud 1

Build Out Your Measurement Chain


M081A70
Model: M081A70

Pre-load bolt (for Models 260A01, 260A11...

$67.00 USD

(Pricing valid only in the U.S.)

082B02
Model: 082B02

Anti-friction washer for Models (M)202B,...

$28.00 USD

(Pricing valid only in the U.S.)

083A10
Model: 083A10

Pilot bushing (for Models 260A01, 260A11...

$57.50 USD

(Pricing valid only in the U.S.)