Products

multi-purpose icp® force sensor, 10 lb comp., 10 lb tension, 500 mv/lb, axial conn.

Force Sensor, ICP®

Model 208A11

Multi-purpose ICP® force sensor, 10 lb comp., 10 lb tension, 500 mV/lb, axial conn.

Measurement Range: 10 lb (0.04448 kN)
Sensitivity: (±15%)500 mV/lb (112404 mV/kN)
Low Frequency Response: (-5%)0.01 Hz
Upper Frequency Limit: 36000 Hz
Temperature Range: -65 to +250 °F (-54 to +121 °C)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[5] Sensor contains protected electronics which may cause long 'turn-on" times.
[2] Typical.
[6] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±15 %)	500 mV/lb	112404 mV/kN
Measurement Range (Compression)	10 lb	0.04448 kN
Measurement Range (Tension)	10 lb	0.04448 kN
Maximum Static Force (Compression)	60 lb	0.270 kN
Maximum Static Force (Tension)	60 lb	0.270 kN
Broadband Resolution (1)	0.0001 lb-rms	0.0004448 N-rms	[2]
Low Frequency Response (-5 %)	0.01 Hz	0.01 Hz	[3]
Upper Frequency Limit	36000 Hz	36000 Hz	[4]
Non-Linearity	≤1 % FS	≤1 % FS	[1]
Environmental
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Coefficient of Sensitivity	≤0.05 %/°F	≤0.09 %/°C
Electrical
Discharge Time Constant (at room temp)	≥50 sec	≥50 sec
Excitation Voltage	18 to 30 VDC	18 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC	[5]
Output Polarity (Compression)	Positive	Positive
Physical
Stiffness	6 lb/µin	1.05 kN/µm	[2]
Size - Hex	0.625 in	15.88 mm
Size - Height	1.17 in	29.7 mm
Weight	0.80 oz	22.7 gm
Housing Material	Stainless Steel	Stainless Steel
Sealing	Epoxy	Epoxy
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Axial	Axial

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A81	Thread lock adhesive (for Series 200)	1
081B05	Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder	1
084A03	Impact cap, convex (for Series 208)	1
M081A62	Mounting stud, 10-32 to M6x1x 8.3 mm long, BeCu	1