Products

ICP® Force Sensor

Model 208A12

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
1	Call for Lead Time

Multi-purpose ICP® force sensor, 100 lb comp., 100 lb tension, 50 mV/lb, axial conn.

Measurement Range: 100 lb (0.4448 kN)
Sensitivity: (±15%)50 mV/lb (11240 mV/kN)
Low Frequency Response: (-5%)0.001 Hz
Upper Frequency Limit: 36000 Hz
Temperature Range: -65 to +250 °F (-54 to +121 °C)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±15 %)	50 mV/lb	11240 mV/kN
Measurement Range (Compression)	100 lb	0.4448 kN
Measurement Range (Tension)	100 lb	0.4448 kN
Maximum Static Force (Compression)	600 lb	2.669 kN
Maximum Static Force (Tension)	500 lb	2.224 kN
Broadband Resolution (1)	0.001 lb-rms	0.004448 N-rms	[2]
Low Frequency Response (-5 %)	0.001 Hz	0.001 Hz	[3]
Upper Frequency Limit	36000 Hz	36000 Hz	[4]
Non-Linearity	≤1 % FS	≤1 % FS	[1]
Environmental
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Coefficient of Sensitivity	≤0.05 %/°F	≤0.09 %/°C
Electrical
Discharge Time Constant (at room temp)	≥500 sec	≥500 sec
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Output Polarity (Compression)	Positive	Positive
Physical
Stiffness	6 lb/µin	1.05 kN/µm	[2]
Size - Hex	0.625 in	15.88 mm
Size - Height	1.17 in	29.7 mm
Weight	0.80 oz	22.7 gm
Housing Material	Stainless Steel	Stainless Steel
Sealing	Epoxy	Epoxy
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Axial	Axial

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A81	Thread lock adhesive (for Series 200)	1
081B05	Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder	1
084A03	Impact cap, convex (for Series 208)	1
M081A62	Mounting stud, 10-32 to M6x1x 8.3 mm long, BeCu	1