high temperature, industrial vibration sensor, 4 to 20 ma output, 0 to 1 in/sec rms, 10 to 1k hz, top exit, 2-pin conn

Loop Powered, Current Output, Industrial Vibration Sensor

Model HT641B01

Add to Quote
  • CE
  • IP

High temperature, industrial vibration sensor, 4 to 20 mA output, 0 to 1 in/sec RMS, 10 to 1k Hz, top exit, 2-pin conn

  • Measurement Range: 0.0 to 1 in/sec rms (0.0 to 25.4 mm/s rms)
  • Output: 4-20 mA
  • Frequency Range: (±10%)600 to 60000 cpm (10 to 1000 Hz)
  • Sensing Element: Ceramic
  • Weight: 4.7 oz (131 gm)

Specification Notes

[1] 1Hz = 60 cpm (cycles per minute).
[2] Current will fluctuate at frequencies below 5 Hz.
[3] Conversion Factor 1 in/sec = 0.0254 m/sec.
[4] Typical.
[5] The low frequency tolerance is within 10% of specified frequency
[6] See PCB Declaration of Conformance PS039 for details.

English: SI:
Performance
Measurement Range 0.0 to 1 in/sec rms 0.0 to 25.4 mm/s rms [3]
Output 4-20 mA 4-20 mA
Frequency Range (±10 %) 600 to 60000 cpm 10 to 1000 Hz [1] [2] [5]
Broadband Resolution 0.005 in/sec rms 0.13 mm/s rms [4]
Non-Linearity ±1 % ±1 %
Environmental
Temperature Range -40 to 257 °F -40 to 125 °C
Enclosure Rating IP68 IP68
Electrical
Excitation Voltage 12 to 30 VDC 12 to 30 VDC
Settling Time (within 2% of value) <15 sec <15 sec
Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
Physical
Size - Hex 1.0 in 25.4 mm
Size - Height 2.6 in 66 mm
Weight 4.7 oz 131 gm
Mounting Thread 1/4-28 UNF No Metric Equivalent
Mounting Torque 3 to 5 ft-lb 4 to 7 Nm
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Stainless Steel Stainless Steel
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015
Electrical Connection Position Top Top
Electrical Connections (Pin A) 4-20 mA Pos (+) 4-20 mA Pos (+)
Electrical Connections (Pin B) 4-20 mA Neg (-) 4-20 mA Neg (-)

* All specifications are at room temperature unless otherwise specified.

Accessories
Supplied
081A40 Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip 1
ICS-4 NIST-traceable single axis amplitude response cal from 0 to +10% freq. (for 4 to 20 mA sensors) 1
M081A61 Mounting stud, 1/4-28 to M6x1 x 8.6 mm long, BeCu w/shoulder 1

Optional Versions

(M) Metric Mount
Accessories:
Supplied M081A61 Mounting Stud 1

(RV) Buffered Analog Signal Output - 100 mV/g (±20%)

English SI
Electrical Connector 3-Pin MIL-C-5015 3-Pin MIL-C-5015
Electrical Connections 4-20 mA Pos (+)
Electrical Connections 4-20 mA Neg/Signal Output Neg
Electrical Connections Signal Output Pos