low power, industrial ceramic shear icp® accel, 100 mv/g, 1.5 to 10k hz, top exit, 10-ft integral cable, single point iso 17025 accredited calibration

Industrial 3-Wire Accelerometer

Model 608M50

Retrieving Price...

(Pricing valid only in the U.S.)

Add to Cart
Units in Stock Lead Times
More on the way Call for Lead Time
  • CE
  • IP

Low power, industrial ceramic shear ICP® accel, 100 mV/g, 1.5 to 10k Hz, top exit, 10-ft integral cable, single point ISO 17025 accredited calibration

    Specification Notes

    [1] Conversion Factor 1g = 9.81 m/s².
    [2] Zero-based, least-squares, straight line method.
    [3] Typical.
    [4] 1/4-28 has no equivalent in S.I. units.
    [5] See PCB Declaration of Conformance PS107 for details.

    English: SI:
    Performance
    Sensitivity (±20 %) 100 mV/g 10.2 mV/(m/s²) [1]
    Measurement Range (12 VDC) ±50 g ±490 m/s² [3]
    Measurement Range (5 VDC) ±15 g ±147 m/s² [3]
    Frequency Range (±3 dB) 90 to 600000 cpm 1.5 to 10000 Hz
    Resonant Frequency 1320 kcpm 22 kHz [3]
    Broadband Resolution (1) 2 mg 19.6 mm/s² [3]
    Non-Linearity ±1 % ±1 % [2]
    Transverse Sensitivity ≤7 % ≤7 %
    Environmental
    Overload Limit (Shock) 5000 g pk 49050 m/s² pk
    Temperature Range -65 to +250 °F -54 to +121 °C
    Temperature Response See Graph %/°F See Graph %/°F [3]
    Enclosure Rating IP68 IP68
    Electrical
    Settling Time (within 1% of bias) ≤5.0 sec ≤5.0 sec
    Discharge Time Constant ≥0.1 sec ≥0.1 sec
    Excitation Voltage 5 to 12 VDC 5 to 12 VDC
    Output Impedance <100 Ohm <100 Ohm
    Current Draw 0.5 mA 0.5 mA
    Output Bias Voltage 2.5 to 6 VDC 2.5 to 6 VDC
    Spectral Noise (10 Hz) 18 µg/√Hz 176.6 (µm/sec2)/√Hz [3]
    Spectral Noise (100 Hz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [3]
    Spectral Noise (1 kHz) 2 µg/√Hz 19.6 (µm/sec2)/√Hz [3]
    Electrical Isolation (Case) >100000000 Ohm >100000000 Ohm
    Physical
    Size - Hex 9/16 in 14 mm
    Size - Height 2.5 in 64 mm
    Weight (with cable) 3.5 oz 99.3 gm
    Mounting Stud Stud
    Mounting Thread 1/4-28 Female 1/4-28 Female [4]
    Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 Nm
    Sensing Element Ceramic Ceramic
    Sensing Geometry Shear Shear
    Housing Material Stainless Steel Stainless Steel
    Sealing Molded Molded
    Electrical Connector Molded Integral Cable Molded Integral Cable
    Electrical Connection Position Top Top
    Cable Termination Blunt cut Blunt cut
    Electrical Connections (Red) Pos (+) Power Pos (+) Power
    Electrical Connections (Black) Ground Ground
    Electrical Connections (White) Acceleration Output Acceleration Output
    Cable Length 10 ft 3 m
    Cable Type 062 3-cond shielded with polyurethane jacket 062 3-cond shielded with polyurethane jacket

    * All specifications are at room temperature unless otherwise specified.

    TempChart

    Accessories
    Supplied
    081A40 Mounting stud, 1/4-28 x 0.438" long stainless steel screw with hex socket and brass tip 1
    ICS-2 Calibration of industrial accel., single-point, 100 Hz reference sensitivity 1

    Optional Versions

    (M) Metric Mount
    Accessories:
    Supplied M081A61 Mounting Stud 1