uht-12™, icp®  triaxial accelerometer, 10 mv/g, adhesive mount, with low temperature coefficient ltc

Triaxial ICP® Accelerometer

Model 339A30

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Lead Time for 1-5 is 8 Wks.
Lead Time for 6-10 is 10 Wks.
  • CE
  • IP

UHT-12™, ICP® triaxial accelerometer, 10 mV/g, adhesive mount, with low temperature coefficient LTC

  • Electrical Filter Corner Frequency: >14 kHz
  • Sensitivity: (±10%)10 mV/g (1.02 mV/(m/s²))
  • Measurement Range: ±500 g pk (±4905 m/s² pk)
  • Electrical Connector: 8-36 4-Pin

Specification Notes


[1] Typical.
[2] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 10 mV/g 1.02 mV/(m/s²)
Measurement Range ±500 g pk ±4905 m/s² pk
Frequency Range (±5 %) 2 to 8000 Hz 2 to 8000 Hz
Resonant Frequency (x or y axis) ≥25 kHz ≥25 kHz
Resonant Frequency (z axis) ≥55 kHz ≥55 kHz
Filter Type (single pole) Low Pass Low Pass
Electrical Filter Roll-off 6 dB/octave 6 dB/octave
Electrical Filter Corner Frequency >14 kHz >14 kHz
Broadband Resolution (1) 0.008 g rms 0.078 m/s² rms [1]
Non-Linearity ≤0.5 % ≤0.5 %
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit (Shock) ±5000 g pk ±49050 m/s² pk
Temperature Range (Operating) -65 to +325 °F -54 to +163 °C
Temperature Response See Graph See Graph [1]
Temperature Coefficient of Sensitivity ≤0.011 %/°F ≤0.020 %/°C
Electrical
Excitation Voltage 18 to 30 VDC 18 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤200 Ohm ≤200 Ohm
Output Bias Voltage (Room Temperature) 7 to 12 VDC 7 to 12 VDC
Discharge Time Constant 0.6 to 2 sec 0.6 to 2 sec
Settling Time (within 10% of bias) <3 sec <3 sec
Spectral Noise (1 Hz) 1700 µg/√Hz 16660 (µm/sec2)/√Hz [1]
Spectral Noise (10 Hz) 500 µg/√Hz 4900 (µm/sec2)/√Hz [1]
Spectral Noise (100 Hz) 200 µg/√Hz 1960 (µm/sec2)/√Hz [1]
Spectral Noise (1 kHz) 100 µg/√Hz 980 (µm/sec2)/√Hz [1]
Physical
Sensing Element UHT-12™ UHT-12™
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Height 0.4 in 10.2 mm
Size - Length 0.4 in 10.2 mm
Size - Width 0.4 in 10.2 mm
Weight 0.14 oz 4 gm [1]
Electrical Connector 8-36 4-Pin 8-36 4-Pin
Electrical Connection Position Side Side
Mounting Adhesive Adhesive

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories


Supplied
034K10 4-conductor, low noise, shielded FEP cable, 10-ft, mini 4-socket plug to (3) BNC plugs (labeled X, Y, Z) 1
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
080A90 Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) 1
ACS-1T Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable 1

Build Out Your Measurement Chain


339A30/NC
Model: 339A30/NC

UHT-12™, ICP® triaxial accelerometer, 1...

$1,622.00 USD

(Pricing valid only in the U.S.)

080A238
Model: 080A238

0.40"/10.2mm Triax cube adhesive mountin...

$370.00 USD

(Pricing valid only in the U.S.)

034K10
Model: 034K10

4-conductor, low noise, shielded FEP cab...

$225.50 USD

(Pricing valid only in the U.S.)

034H10
Model: 034H10

4-conductor, low noise, shielded FEP cab...

$276.50 USD

(Pricing valid only in the U.S.)

019B20
Model: 019B20

4-conductor, shielded cable, silicone ja...

$434.00 USD

(Pricing valid only in the U.S.)