ICP® Force Sensor

Model 208C01

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock	Lead Times
More on the way	Lead Time for 1-10 is 14 Dys. Lead Time for 11-20 is 4 Wks.

Platinum Stock Products; Multi-purpose, ICP® force sensor, 10 lb comp., 10 lb tension, 500 mV/lb

Measurement Range: 10 lb (0.04448 kN)
Sensitivity: (±15%)500 mV/lb (112410 mV/kN)
Low Frequency Response: (-5%)0.01 Hz
Upper Frequency Limit: 36000 Hz
Temperature Range: -65 to +250 °F (-54 to +121 °C)
Mounting Thread: 10-32 Female

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[2] Typical.
[5] Sensor contains protected electronics which may cause long 'turn-on" times.
[2] Typical.
[6] See PCB Declaration of Conformance PS023 for details.

	English:	SI:
Performance
Sensitivity (±15 %)	500 mV/lb	112410 mV/kN
Measurement Range (Compression)	10 lb	0.04448 kN
Measurement Range (Tension)	10 lb	0.04448 kN
Maximum Static Force (Compression)	60 lb	0.27 kN
Maximum Static Force (Tension)	60 lb	0.27 kN
Broadband Resolution (1)	0.0001 lb-rms	0.00045 N-rms	[2]
Low Frequency Response (-5 %)	0.01 Hz	0.01 Hz	[3]
Upper Frequency Limit	36000 Hz	36000 Hz	[4]
Non-Linearity	≤1 % FS	≤1 % FS	[1]
Environmental
Temperature Range	-65 to +250 °F	-54 to +121 °C
Temperature Coefficient of Sensitivity	≤0.05 %/°F	≤0.09 %/°C
Electrical
Discharge Time Constant (at room temp)	≥50 sec	≥50 sec
Excitation Voltage	18 to 30 VDC	18 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC	[5]
Spectral Noise (1 Hz)	0.0000126 lb/√Hz	0.0000562 N/√Hz	[2]
Spectral Noise (10 Hz)	0.00000424 lb/√Hz	0.0000189 N√Hz	[2]
Spectral Noise (100 Hz)	0.00000149 lb/√Hz	0.00000665 N/√Hz	[2]
Spectral Noise (1000 Hz)	0.000000522 lb/√Hz	0.00000233 N/√Hz	[2]
Output Polarity (Compression)	Positive	Positive
Physical
Stiffness	6 lb/µin	1.05 kN/µm	[2]
Size - Hex	0.625 in	15.88 mm
Size - Height	0.625 in	15.88 mm
Size - Sensing Surface	0.500 in	12.7 mm
Weight	0.80 oz	22.7 gm
Housing Material	Stainless Steel	Stainless Steel
Sealing	Hermetic	Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Side	Side
Mounting Thread	10-32 Female	10-32 Female

* All specifications are at room temperature unless otherwise specified.

Accessories


Supplied
080A81	Thread lock adhesive (for Series 200)	1
084A03	Impact cap, convex (for Series 208)	1
081B05	Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder	2
M081A62	Mounting stud, 10-32 to M6x1x 8.3 mm long, BeCu	2