load cell, side force, 15 lb., integral center mount cable with pigtails, trimmed output of 1.2 mv/v (+/- 5%) at full scale, gse standard wiring code, additional cal.

Strain Gage Side Force Load Cell

Model 1903-01C

Add to Quote
  • IP

Load Cell, Side Force, 15 Lb., integral center mount cable with pigtails, trimmed output of 1.2 mV/V (+/- 5%) at full scale, GSE standard wiring code, additional cal.

  • Measurement Range: 15 lbf (66.7 N)
  • Size - Diameter: 1.50 in (38.1 mm)
  • Size - Height: 1.25 in (31.75 mm)

Specification Notes

[1] FS - Full Scale.
[2] RO - Rated Output.
[3] Over compensated operating temperature range.
[4] Nominal.
[5] Calibrated at 10 VDC, usable 3 to 20 VDC or VAC RMS.
[6] See Outline Drawing 74950 for Complete Dimensions

English: SI:
Performance
Measurement Range 15 lbf 66.7 N [1]
Sensitivity (10 %) 1.35 mV/V 1.35 mV/V [2]
Non-Linearity ≤0.10 % FS ≤0.10 % FS
Hysteresis ≤0.10 % FS ≤0.10 % FS
Non-Repeatability ≤0.02 %RO ≤0.02 %RO
Environmental
Overload Limit 23 lbf 100 N
Temperature Range (Operating) -65 to +200 °F -54 to +93 °C
Temperature Range (Compensated) +70 to +170 °F +21 to +77 °C
Temperature Effect on Output (Maximum) ±0.002 %Reading/°F ±0.0036 %Reading/°C [3]
Temperature Effect on Zero Balance (Maximum) ±0.001 %FS/°F ±0.0018 %FS/°C [3]
Electrical
Bridge Resistance 2000 Ohm 2000 Ohm [4]
Excitation Voltage (Recommended) 10 VDC 10 VDC [5]
Insulation Resistance >5000000000 Ohm >5000000000 Ohm
Zero Balance ≤1 % FS ≤1 % FS
Output Polarity Positive Positive
Physical
Size - Height 1.25 in 31.75 mm [6]
Size - Diameter 1.50 in 38.1 mm [6]
Weight 0.30 lb 0.13 kg
Mounting Thread #4-40 Female No Metric Equivalent
Housing Material Aluminum Aluminum
Sensing Element Strain Gage Strain Gage
Deflection at Full Scale Capacity 0.004 in 0.12 mm
Electrical Connector pigtail ends pigtail ends
Electrical Connection Position Bottom Bottom

* All specifications are at room temperature unless otherwise specified.