Model 603C01 Product Type: Accelerometer, Vibration Sensor General purpose, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin conn. View Spec Sheet (PDF) View photo and drawing .
PERFORMANCE ENGLISH SI Sensitivity(± 10 %) 100 mV/g 10.2 mV/(m/s²) [2] Measurement Range ± 50 g ± 490 m/s² Frequency Range(± 3 dB) 30 to 600,000 cpm 0.5 to 10,000 Hz [3] Resonant Frequency 1500 kcpm 25 kHz [1] Broadband Resolution(1 to 10,000 Hz) 350 µg 3434 µm/sec2 [1] Non-Linearity ± 1 % ± 1 % [4] Transverse Sensitivity ≤ 7 % ≤ 7 % ENVIRONMENTAL Overload Limit(Shock) 5000 g pk 49,050 m/s² pk Temperature Range -65 to +250 °F -54 to +121 °C Temperature Response See Graph See Graph [1] Enclosure Rating IP68 IP68 ELECTRICAL Settling Time(within 1% of bias) ≤ 2.0 sec ≤ 2.0 sec Discharge Time Constant ≥ 0.3 sec ≥ 0.3 sec Excitation Voltage 18 to 28 VDC 18 to 28 VDC Constant Current Excitation 2 to 20 mA 2 to 20 mA Output Impedance <150 ohm <150 ohm Output Bias Voltage 8 to 12 VDC 8 to 12 VDC Spectral Noise(10 Hz) 8 µg/√Hz 78.5 (µm/sec2)/√Hz [1] Spectral Noise(100 Hz) 5 µg/√Hz 49.1 (µm/sec2)/√Hz [1] Spectral Noise(1 kHz) 4 µg/√Hz 39.2 (µm/sec2)/√Hz [1] Electrical Isolation(Case) >108 ohm >108 ohm PHYSICAL Size (Hex x Height) 11/16 in x 1.65 in 18 mm x 42.2 mm Weight 1.8 oz 51 gm Mounting Thread 1/4-28 Female No Metric Equivalent [5] Mounting Torque 2 to 5 ft-lb 2.7 to 6.8 N-m Sensing Element Ceramic Ceramic Sensing Geometry Shear Shear Housing Material Stainless Steel Stainless Steel Sealing Welded Hermetic Welded Hermetic Electrical Connector 2-Pin MIL-C-5015 2-Pin MIL-C-5015 Electrical Connection Position Top Top SUPPLIED ACCESSORIES: Model 081A40 Mounting Stud Model ICS-2 NIST-traceable single-axis single-point amplitude response calibration at 6000 cpm (100 Hz) (1) OPTIONAL VERSIONS EX- Hazardous Area Approval- contact factory for specific approvals Hazardous Area Approval EEx nL IIC T4, -40°C≤Ta≤121°C, II 1 G Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I Hazardous Area Approval Exia IIC T4, AExia IIC, T4 Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4 Hazardous Area Approval EEx nL IIC T4, -40°C≤Ta≤121°C, II 3 G M- Metric Mount Supplied Accessory : Model M081A61 Mounting Stud 1/4-28 to M6 X 1 (1) TO- Temperature Output Temperature Output Range +36 to +250 °F +2 to +121 °C Temperature Scale Factor 5.56 mV/°F + 32 +10 mV/°C Electrical Connector 3-Pin MIL-C-5015 Electrical Connections(Pin A) Acceleration Output Electrical Connections(Pin B) Ground Electrical Connections(Pin C) Temperature Output Size - Height 1.86 in 47.2 Weight 2.0 oz 56.7 All specifications are at room temperature unless otherwise specified. NOTES: [1] Typical. [2] Conversion Factor 1g = 9.81 m/s². [3] The high frequency tolerance is accurate within ±10% of the specified frequency. [4] Zero-based, least-squares, straight line method. [5] 1/4-28 has no equivalent in S.I. units. [6] See PCB Declaration of Conformance PS023 or PS060 for details. [6]
Download Drawing 13173-A.pdf
Top