Model 352C33 Product Type: Accelerometer, Vibration Sensor High sensitivity, ceramic shear ICP® accel., 100 mV/g, 0.5 Hz to 10k Hz, 10-32 side conn. View Spec Sheet (PDF) View photo and drawing .
PERFORMANCE ENGLISH SI Sensitivity(± 10 %) 100 mV/g 10.2 mV/(m/s²) Measurement Range ± 50 g pk ± 490 m/s² pk Frequency Range(± 5 %) 0.5 to 10,000 Hz 0.5 to 10,000 Hz Frequency Range(± 10 %) 0.3 to 15,000 Hz 0.3 to 15,000 Hz Resonant Frequency ≥ 50 kHz ≥ 50 kHz Broadband Resolution(1 to 10,000 Hz) 0.00015 g rms 0.0015 m/s² rms [1] Non-Linearity ≤ 1 % ≤ 1 % [4] Transverse Sensitivity ≤ 5 % ≤ 5 % [5] ENVIRONMENTAL Overload Limit(Shock) ± 5000 g pk ± 49,000 m/s² pk Temperature Range(Operating) -65 to +200 °F -54 to +93 °C [3] Temperature Response See Graph See Graph [3][1] Base Strain Sensitivity 0.003 g/µε 0.029 (m/s²)/µε [1] ELECTRICAL Excitation Voltage 18 to 30 VDC 18 to 30 VDC Constant Current Excitation 2 to 20 mA 2 to 20 mA Output Impedance ≤ 200 ohm ≤ 200 ohm Output Bias Voltage 7 to 12 VDC 7 to 12 VDC Discharge Time Constant 1.0 to 2.5 sec 1.0 to 2.5 sec Settling Time(within 10% of bias) <10 sec <10 sec Spectral Noise(1 Hz) 39 µg/√Hz 380 (µm/sec2)/√Hz [1] Spectral Noise(10 Hz) 11 µg/√Hz 110 (µm/sec2)/√Hz [1] Spectral Noise(100 Hz) 3.4 µg/√Hz 33 (µm/sec2)/√Hz [1] Spectral Noise(1 kHz) 1.4 µg/√Hz 14 (µm/sec2)/√Hz [1] PHYSICAL Sensing Element Ceramic Ceramic Sensing Geometry Shear Shear Housing Material Titanium Titanium Sealing Hermetic Hermetic Size (Hex x Height) 0.44 in x 0.62 in 11.2 mm x 15.7 mm Weight 0.20 oz 5.8 gm [1] Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack Electrical Connection Position Side Side Mounting Thread 10-32 Female 10-32 Female Mounting Torque 10 to 20 in-lb 113 to 226 N-cm SUPPLIED ACCESSORIES: Model 080A Adhesive Mounting Base (1) Model 080A109 Petro Wax (1) Model 081B05 Mounting Stud (10-32 to 10-32) (1) Model ACS-1 NIST traceable frequency response (10 Hz to upper 5% point). (1) Model M081B05 Mounting Stud 10-32 to M6 X 0.75 (1) OPTIONAL VERSIONS HT- High temperature, extends normal operation temperatures [3] Frequency Range(5 %) 6 to 10,000 Hz 6 to 10,000 Hz Frequency Range(10 %) 4.5 to 15,000 Hz 4.5 to 15,000 Hz Broadband Resolution(1 to 10,000 Hz) 0.0009 g rms 0.009 m/s² rms Temperature Range(Operating) -65 to +325 °F -54 to +163 °C Excitation Voltage 22 to 30 VDC Discharge Time Constant 0.07 to 0.15 sec Spectral Noise(1 Hz) 107 µg/√Hz 1050 (µm/sec2)/√Hz Spectral Noise(10 Hz) 58 µg/√Hz 570 (µm/sec2)/√Hz Spectral Noise(100 Hz) 41 µg/√Hz 400 (µm/sec2)/√Hz Spectral Noise(1 kHz) 9.8 µg/√Hz 96 (µm/sec2)/√Hz Output Bias Voltage 10 to 15 VDC [2] Supplied Accessory : Model ACS-68 Single Axis Amplitude Response Calibration from 5 Hz to upper 5% plotted on dB scale replaces Model ACS-1 J- Ground Isolated Frequency Range(5 %) 9 kHz 9 kHz Frequency Range(10 %) 14 kHz 14 kHz Resonant Frequency ≥ 40 kHz ≥ 40 kHz Electrical Isolation(Base) >108 ohm Size - Hex x Height 0.44 in x 0.67 in 11.2 mm x 17.0 mm Weight 0.21 oz 6.0 gm T- TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4 Temperature Range(Memory Access) -10 to +200 °F -23 to +93 °C Excitation Voltage 20 to 30 VDC Output Bias Voltage 7.5 to 13 VDC TLA- TEDS LMS International - Free Format Temperature Range(Memory Access) -10 to +200 °F -23 to +93 °C Excitation Voltage 20 to 30 VDC Output Bias Voltage 7.5 to 13 VDC TLB- TEDS LMS International - Automotive Format Temperature Range(Memory Access) -10 to +200 °F -23 to +93 °C Excitation Voltage 20 to 30 VDC Output Bias Voltage 7.5 to 13 VDC TLC- TEDS LMS International - Aeronautical Format Temperature Range(Memory Access) -10 to +200 °F -23 to +93 °C Excitation Voltage 20 to 30 VDC Output Bias Voltage 7.5 to 13 VDC TLD- TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4 Temperature Range -10 to +200 °F -23 to +93 °C Excitation Voltage 20 to 30 VDC Output Bias Voltage 7.5 to 13 VDC W- Water Resistant Cable Electrical Connector Sealed Integral Cable Electrical Connection Position Side All specifications are at room temperature unless otherwise specified. NOTES: [1] Typical. [2] TEDS option adds 1.0 VDC to bias voltage. [3] 200°F to 325°F data valid with HT option only. [4] Zero-based, least-squares, straight line method. [5] Transverse sensitivity is typically ≤ 3%. [6] See PCB Declaration of Conformance PS023 for details. [6]
Download Drawing 081-XXXX-90-P.pdf
Download Drawing 13091-A.pdf
Top