quartz shear triaxial icp® accelerometer, 10 mv/g, 2 to 5k hz, titanium housing, 1/4-28 4-pin, 5-40 stud mount, low temperature coefficient ltc, +325f temp rating, teds 1.0

Triaxial ICP® Accelerometer

Model TLD339A36

Retrieving Price...

(Pricing valid only in the U.S.)

Units in Stock Lead Times
More on the way Lead Time for 1-5 is 8 Wks.
Lead Time for 6-10 is 10 Wks.
Lead Time for 11-20 is 12 Wks.
Lead Time for 11-20 is 12 Wks.
  • CE
  • IP

Quartz shear triaxial ICP® accelerometer, 10 mV/g, 2 to 5k Hz, titanium housing, 1/4-28 4-pin, 5-40 stud mount, low temperature coefficient LTC, +325F temp rating, TEDS 1.0

  • Electrical Filter Corner Frequency: >13 kHz
  • Sensitivity: (±10%)10 mV/g (1.0 mV/(m/s²))
  • Measurement Range: ±500 g pk (±4900 m/s² pk)
  • Electrical Connector: 1/4-28 4-Pin

Specification Notes


[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±10 %) 10 mV/g 1.0 mV/(m/s²)
Measurement Range ±500 g pk ±4900 m/s² pk
Frequency Range (±5 %) 2 to 5000 Hz 2 to 5000 Hz
Frequency Range (±10 %) 1 to 8000 Hz 1 to 8000 Hz
Resonant Frequency ≥35 kHz ≥35 kHz
Filter Type (single pole) Low Pass Low Pass
Electrical Filter Roll-off 6 dB/octave 6 dB/octave
Electrical Filter Corner Frequency >13 kHz >13 kHz
Broadband Resolution (1) .003 g rms .029 m/sec²rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 %
TEDS Compliant (Per IEEE 1451.4) Yes Yes
Environmental
Overload Limit (Shock) ±5000 g pk ±49000 m/s² pk
Temperature Range (Operating) -65 to 325 °F -54 to 163 °C
Temperature Response See Graph See Graph [2]
Temperature Coefficient of Sensitivity -.03 %/°F -.06 %/°C [2]
Base Strain Sensitivity .001 g/µε .0098 (m/s²)/µε [2]
Electrical
Excitation Voltage 21 to 30 VDC 21 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤200 Ohm ≤200 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Discharge Time Constant .3 to 1.1 sec .3 to 1.1 sec
Settling Time (within 10% of bias) <5 sec <5 sec
Spectral Noise (1 Hz) 2080 µg/√Hz 20405 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 250 µg/√Hz 2453 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 50 µg/√Hz 491 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 20 µg/√Hz 196 (µm/sec2)/√Hz [2]
Spectral Noise (10 kHz) 19 µg/√Hz 186 (µm/sec2)/√Hz [2]
Physical
Sensing Element Quartz Quartz
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Hermetic Hermetic
Size - Height 0.55 in 14.0 mm
Size - Length 0.80 in 20.3 mm
Size - Width 0.55 in 14.0 mm
Weight 0.37 oz 10.5 gm [2]
Electrical Connector 1/4-28 4-Pin 1/4-28 4-Pin
Electrical Connection Position Side Side
Mounting Thread 5-40 Female 5-40 Female

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories


Supplied
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
080A145 Adhesive mtg base, 0.75" hex x 0.2" thk, 5-40 tapped hole, w/isolating hardcoat finish 1
080A90 Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) 1
081A27 Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu 1
ACS-1T Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable 1
M081A27 Metric mtg stud, 5-40 to M3 x 0.50 long 1

Optional Versions


Build Out Your Measurement Chain


010G10
Model: 010G10

4-conductor, shielded, FEP cable, 10-ft,...

$169.50 USD

(Pricing valid only in the U.S.)

034G10
Model: 034G10

4-conductor, low noise, shielded FEP cab...

$200.00 USD

(Pricing valid only in the U.S.)

034W10
Model: 034W10

4-conductor, twisted bundle, low noise, ...

$283.00 USD

(Pricing valid only in the U.S.)

078G10
Model: 078G10

4-conductor, twisted bundle, low noise, ...

$210.50 USD

(Pricing valid only in the U.S.)

078W10
Model: 078W10

4-conductor, twisted bundle, low noise, ...

$297.50 USD

(Pricing valid only in the U.S.)

036G10
Model: 036G10

4-conductor, silicone jacket cable, 10-f...

$214.00 USD

(Pricing valid only in the U.S.)