Products

triaxial, lightweight miniature icp® accel, 10 mv/g, 0.25 cube, 10-ft integral cable, non-conductive housing for use up to 2000 volts.

TRIAXIAL ACCELEROMETER

Model HV356A03

  • CE
  • IP

Triaxial, lightweight miniature ICP® accel, 10 mV/g, 0.25" cube, 10-ft integral cable, non-conductive housing for use up to 2000 volts.

    Specification Notes

    [1] Zero-based, least-squares, straight line method.
    [2] Typical.
    [3] Maximum.
    [2] Typical.
    [4] See PCB Declaration of Conformance PS023 for details.

    English: SI:
    Performance
    Sensitivity (±20 %) 10 mV/g 1.02 mV/(m/s²)
    Measurement Range ±500 g pk ±4905 m/s² pk
    Frequency Range (±5 %) (y or z axis) 2 to 6800 Hz 2 to 6800 Hz
    Frequency Range (±5 %) (x axis) 2 to 4200 Hz 2 to 4200 Hz
    Frequency Range (+1 dB) (x axis) ≥6800 kHz ≥6800 kHz
    Resonant Frequency ≥45 kHz ≥45 kHz
    Broadband Resolution (1) 0.003 g rms 0.03 m/s² rms [2]
    Non-Linearity ≤1 % ≤1 % [1]
    Transverse Sensitivity ≤6 % ≤6 %
    Environmental
    Overload Limit (Shock) ±5000 g pk ±49050 m/s² pk
    Temperature Range (Operating) -65 to +250 °F -54 to +121 °C
    Temperature Response See Graph %/°F See Graph %/°F [2]
    Electrical
    Excitation Voltage 22 to 30 VDC 22 to 30 VDC
    Constant Current Excitation 2 to 20 mA 2 to 20 mA
    Output Impedance ≤200 Ohm ≤200 Ohm
    Output Bias Voltage 9 to 16 VDC 9 to 16 VDC
    Discharge Time Constant 0.24 to 1.0 sec 0.24 to 1.0 sec
    Settling Time (within 10% of bias) <3 sec <3 sec
    Spectral Noise (1 Hz) 1200 µg/√Hz 11772 (µm/sec2)/√Hz [2]
    Spectral Noise (10 Hz) 300 µg/√Hz 2943 (µm/sec2)/√Hz [2]
    Spectral Noise (100 Hz) 100 µg/√Hz 981 (µm/sec2)/√Hz [2]
    Spectral Noise (1 kHz) 30 µg/√Hz 294 (µm/sec2)/√Hz [2]
    Electrical Isolation 2000 VDC 2000 VDC [3]
    Physical
    Sensing Element Ceramic Ceramic
    Sensing Geometry Shear Shear
    Housing Material Polymer Polymer
    Sealing Hermetic Hermetic
    Size - Height 0.34 in 8.64 mm
    Size - Length 0.34 in 8.64 mm
    Size - Width 0.34 in 8.64 mm
    Weight (without cable) 0.06 oz 1.7 gm [2]
    Electrical Connector Integral Cable Integral Cable
    Electrical Connection Position Side Side
    Cable Termination 1/4-28 4-Pin Jack 1/4-28 4-Pin Jack
    Cable Length 10 ft 3 m
    Cable Type 4-conductor shielded, polyolefin jacket 4-conductor shielded, polyolefin jacket
    Mounting Adhesive Adhesive

    * All specifications are at room temperature unless otherwise specified.

    TempChart

    Accessories
    Supplied
    080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
    080A90 Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) 1
    ACS-1T Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable 1