Products

high resolution, ceramic shear icp® accel., 1000 mv/g, 2 to 10k hz, 10-32 top conn., teds v1.0

Accelerometer, ICP®

Model TLD352B

Add to Quote
  • CE
  • IP

High resolution, ceramic shear ICP® accel., 1000 mV/g, 2 to 10k Hz, 10-32 top conn., TEDS V1.0

The high sensitivity and low noise allows for measurement of micro-vibration.
  • Sensitivity: (±5%)1000 mV/g (102 mV/(m/s²))
  • Measurement Range: ±5 g pk (±49.1 m/s² pk)
  • Broadband Resolution: 0.00008 g rms (0.0008 m/s² rms)
  • Frequency Range: (±5%)2 to 10000 Hz
  • Sensing Element: Ceramic
  • Weight: 0.9 oz (25 gm)

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

English: SI:
Performance
Sensitivity (±5 %) 1000 mV/g 102 mV/(m/s²)
Measurement Range ±5 g pk ±49.1 m/s² pk
Frequency Range (±5 %) 2 to 10000 Hz 2 to 10000 Hz
Frequency Range (±10 %) 1 to 15000 Hz 1 to 15000 Hz
Resonant Frequency ≥25 kHz ≥25 kHz
Broadband Resolution (1) 0.00008 g rms 0.0008 m/s² rms [2]
Non-Linearity ≤1 % ≤1 % [1]
Transverse Sensitivity ≤5 % ≤5 %
Environmental
Overload Limit ±1000 g pk ±9810 m/s² pk
Temperature Range -65 to +200 °F -54 to +93 °C
Temperature Response See Graph %/°F See Graph %/°F [2]
Base Strain Sensitivity 0.001 g/µε 0.01 (m/s²)/µε [2]
Electrical
Excitation Voltage 20 to 30 VDC 20 to 30 VDC
Constant Current Excitation 2 to 20 mA 2 to 20 mA
Output Impedance ≤500 Ohm ≤500 Ohm
Output Bias Voltage 8 to 14 VDC 8 to 14 VDC
Discharge Time Constant 0.1 to 0.6 sec 0.1 to 0.6 sec
Spectral Noise 15 µg/√Hz 147 (µm/sec2)/√Hz [2]
Spectral Noise (10 Hz) 5 µg/√Hz 49 (µm/sec2)/√Hz [2]
Spectral Noise (100 Hz) 2 µg/√Hz 19.6 (µm/sec2)/√Hz [2]
Spectral Noise (1 kHz) 1 µg/√Hz 9.8 (µm/sec2)/√Hz [2]
Physical
Weight 0.9 oz 25 gm [2]
Sensing Element Ceramic Ceramic
Sensing Geometry Shear Shear
Housing Material Titanium Titanium
Sealing Welded Hermetic Welded Hermetic
Electrical Connector 10-32 Coaxial Jack 10-32 Coaxial Jack
Electrical Connection Position Top Top
Mounting Thread 10-32 Female 10-32 Female
Mounting Torque 10 to 20 in-lb 113 to 226 N-cm

* All specifications are at room temperature unless otherwise specified.

TempChart

Accessories
Supplied
080A109 Petro Wax, one square, 1" x 1" x 0.25" 1
080A12 Adhesive mtg base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insolation hardcoat finish 1
081B05 Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder 1
ACS-1 Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable 1
M081B05 Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu 1

Optional Versions

(J) Ground Isolated

English SI
Resonant Frequency 21 kHz
Size - Hex 0.75 in 19.1 mm
Size - Height 1.15 in 29.2 mm
Electrical Isolation >100000000 Ohm

(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4

English SI
Output Bias Voltage 7.5 to 13
Temperature Range -10 to +200 -23 to +93

(TLA) TEDS LMS International - Free Format

English SI
Output Bias Voltage 7.5 to 13
Temperature Range -10 to +200 -23 to +93

(TLB) TEDS LMS International - Automotive Format

English SI
Output Bias Voltage 7.5 to 13
Temperature Range -10 to +200 -23 to +93

(TLC) TEDS LMS International - Aeronautical Format

English SI
Output Bias Voltage 7.5 to 13
Temperature Range -10 to +200 -23 to +93

(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4

English SI
Output Bias Voltage 7.5 to 13
Temperature Range -10 to +200 -23 to +93

(W) Water Resistant Cable

English SI
Electrical Connection Position Top