Products

pcb l&t in-line strain gage signal conditioner, calibrated +/- 10v and 4 to 20 ma outputs, 10 vdc excitation voltage, switch activated shunt, 12 to 28 vdc operation, ip66 enclosure, 0.01% accuracy

Strain Gage Sensor Signal Condition

Model 8162-011A

  • IP

PCB L&T In-line strain gage signal conditioner, calibrated +/- 10V and 4 to 20 mA outputs, 10 VDC excitation voltage, switch activated shunt, 12 to 28 VDC operation, IP66 enclosure, 0.01% accuracy

Strain gage signal conditioner in IP66 (NEMA 4X) enclosure operates from 12 to 28 VDC and provides 5 or 10 VDC sensor excitation. Delivers +/- 5 or +/- 10 volts and 4-20 mA output via screw terminal connections.


PT Cable <20ft: 8311-01-xxA
PT Cable >=20ft: 8311-02-xxA
PC Cable <20ft: 8315-01-xxA
PC Cable >=20ft: 8315-02-xxA

    Specification Notes


    [1] User Adjustable.
    [2] Filtered via 2-pole active filter.
    [3] Factory Adjustable

    English: SI:
    Performance
    Electrical Filter Cutoff Frequency 100 Hz 100 Hz [2]
    Frequency Range 0 to 1000 Hz 0 to 1000 Hz
    Input Signal (sensor sensitivity) 0.5 to 11 mV/V 0.5 to 11 mV/V [1]
    Environmental
    Temperature Range +32 to +158 °F 0 to +70 °C
    Enclosure Rating NEMA 4X IP66.
    Excitation Current 60 mA 60 mA
    Electrical
    Excitation Voltage 10 VDC 10 VDC [3]
    Output Voltage ±10 VDC ±10 VDC [3]
    Output Current 4 to 20 mA 4 to 20 mA
    Power Required 12 to 28 Vdc 12 to 28 Vdc
    Offset Voltage (@min. gain) ±50% of F.S. ±50% of F.S.
    Offset Voltage (@max.gain) ±70% of F.S. ±70% of F.S.
    Physical
    Electrical Connector (input/output) screw terminal screw terminal
    Size - Height 3.70 in 94.0 mm
    Size - Width 2.55 in 64.8 mm
    Size - Length 2.23 in 56.6 mm

    * All specifications are at room temperature unless otherwise specified.